Reduced Megger MIT400 Series Industrial Digital/Analog Insulation Tester

The Megger MIT400 Series Industrial Digital/Analog Insulation Tester it's nice

Safety rated to European Standard EN61010-1 Category IV, 600V and IP54 rated for protection against dust and splashing water.Voltage detection test inhibit function set at 50V for safety.Autoranging digital meter with TRMS voltage detection.Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.Dual digital display with analog arc function to replicate response of analog meters.. Follow the link just for filled content and articles...

The Megger MIT400 series industrial insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in electrical systems. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature prevents testing when a circuit has a voltage of greater than 50V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.

Specifications

Automatic continuity testing range	0.01 to 100 Ohms (0-50 Ohms on analog range)
Voltage testing range	0 to 600V DC or TRMS
Voltage test inhibit level	50V
Power supply	5 AA alkaline or rechargeable batteries
Weight	590g / 20.73oz.
Safety standard met	International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V
Mechanical standard met	IP54, for protection from dust and splashing water
Dimensions	220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inches

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen.

Lot previous buyer like the Megger MIT400 Series Industrial Digital/Analog Insulation Tester And even to order web based currently the best places to order the application

Megger MIT400 Series Industrial Digital/Analog Insulation Tester low price

Safety rated to European Standard EN61010-1 Category IV, 600V and IP54 rated for protection against dust and splashing water

Voltage detection test inhibit function set at 50V for safety

Autoranging digital meter with TRMS voltage detection

Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations

Dual digital display with analog arc function to replicate response of analog meters

The Megger MIT400 Series Industrial Digital/Analog Insulation Tester We highly recommend. once again we have already done research the best price for you.